English
Deutsch
Français
Italiano
Español
Recommendations for reaming
On this page, you will find some general recommendations for your workshop with our reamers and floating holders. Please do not hesitate to contact us for more informations.
| Material | Hardness (N/mm2) |
Reamers Ø (mm) |
Cutting speed v=(m/min) |
Feed * f=(mm/U) |
Depth of cut (mm/Ø) |
|||||||||||
| HSS-E | ACUREA | HM/CAR | PERFOR | HSS-E | ACUREA | HM/CAR | PERFOR | HSS-E | ACUREA | HM/CAR | PERFOR | |||||
| Steels, Cast steel | 400-800 | 1 - 3 | 8 - 18 | 20 - 40 | 15 -25 | 150-260 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | ||||||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | ||||||||||||||
| 10-20 | 0.3 - 0.5 mm | 0.2 - 0.4 mm | ||||||||||||||
| Steels alloyed | 800-1200 | 1 - 3 | 4 - 10 | 15 - 30 | 7 - 15 | 120 - 250 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | ||||||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | ||||||||||||||
| 10-20 | 0.3 - 0.5 mm | 0.2 - 0.4 mm | ||||||||||||||
| Stainles | 700-1000 | 1 - 3 | 3 - 6 | 10 - 20 | 8 - 12 | 30 - 60 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | ||||||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | ||||||||||||||
| 10-20 | 0.3 - 0.5 mm | 0.2 - 0.4 mm | ||||||||||||||
| Cast iron | 200 | 1 - 3 | 6 - 10 | 20 - 30 | 10 - 20 | 100 - 200 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | ||||||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | ||||||||||||||
| 10-20 | 0.3 - 0.5 mm | 0.2 - 0.4 mm | ||||||||||||||
| Titan, Alloyed | 900-1200 | 1 - 3 | 10 - 15 | 20 - 40 | 15 - 20 | 40 - 80 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | ||||||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | ||||||||||||||
| 10-20 | 0.2 - 0.4 mm | 0.2 - 0.4 mm | ||||||||||||||
| Copper alloyed | 350-700 | 1 - 3 | 8 - 12 | 20 - 40 | 15 - 20 | 180 - 250 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | ||||||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | ||||||||||||||
| 10-20 | 0.3 - 0.5 mm | 0.3 - 0.5 mm | ||||||||||||||
| Aluminium | 350-500 | 1 - 3 | 10 - 20 | 30 - 50 | 20 - 30 | 120 - 250 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | ||||||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | ||||||||||||||
| 10-20 | 0.3 - 0.4 mm | 0.2 - 0.4 mm | ||||||||||||||
| Brass alloyed | 1 - 3 | 10 - 12 | 25 - 50 | 20 - 25 | 180 - 250 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | |||||||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | ||||||||||||||
| 10-20 | 0.3 - 0.5 mm | 0.3 - 0.5 mm | ||||||||||||||
| Plastics | 1 - 3 | 4 - 10 | 20 - 40 | 10 - 20 | 140 - 250 | 0.1 - 0.2 mm | 0.05 - 0.15 mm | |||||||||
| 4 - 9 | 0.15 - 0.25 mm | 0.1 - 0.2 mm | ||||||||||||||
| 10-20 | 0.3 - 0.4 mm | 0.2 - 0.4 mm | ||||||||||||||
| * Feed | n=U/min. | with floating holder | n = 2000 - 300 U/min. | |||||||||||||
| Speed | f=mm/U | the harder the material | f = less | the softer the material | f = more | |||||||||||
| Return fee | speed | |||||||||||||||
| Coolant | oil / soluble 1:10 | also with through coolant | 10 - 40 Bar | |||||||||||||